该词条未找到_海词词典

您要查找的是不是：

Keywords twin screw extrusion;operation parameters;bood characteristics; 双螺杆挤压;操作参数;食品特性;
Using the datum curves from the twin screw extrusion experiment,the correlative factors influencing the fill ratio of screw are analysed. 利用双螺杆挤出实验中的实验数据曲线，对影响螺杆填充率的诸相关因素进行分析。
The composite of glass fiber reinforced PET (FRPET)/Ultra-fine CaCO3 modified by La3+ (UCa-CO3-La3 + ) was prepared by twin screw extrusion. 采用双螺杆挤出制备了玻璃纤维增强PET(FRPET)/稀土镧化合物改性超细碳酸钙(UCaC03一La3’)复合材料,将UCaCO3-La3+对FRPET性能的影响与有机钠盐类成核剂NA做了对比。
Screw configuration of different functional sections and modular design of whole screw in intermeshing co rotating twin screw extrusion are introduced. 介绍了啮合同向双螺杆挤出过程中不同功能段的螺杆构型和整根螺杆的组合设计。
With visualization twin screw extruder, the melting progressing of Polypropylene (PP) in intermeshing counter rotating twin screw extrusion was investigated. 借助于玻璃视窗可视化挤出机,对啮合异向双螺杆挤出过程中聚合物粉料的熔融进行了实验研究;
In twin screw extrusion process, the island sea model is the coexistent form of the two phase of solid and liquid, which has been seen usually in the melting process of solid pellets. 在双螺杆挤出过程中,聚合物颗粒挤出熔融过程中较为常见的一种固、液两相共存的形式可以用“海-岛”模型来描述。
Keywords twin screw extruder;reaction extrusion;extrusion parameter;multiscrew extruder;development; 双螺杆挤出机;反应挤出;挤出参数;多螺杆挤出机;开发;
Keywords Corotating twin screw extrusion;Polymer blend;Phase category fragmentation; 同向双螺杆挤出;聚合物共混物;相畴破碎;
Keywords butadiene-styrene transparent impact resin;concentration;devolatilization;twin screw extrusion process;wet coacervation process; 丁苯透明抗冲树脂;浓缩;脱挥;双螺杆挤出工艺;湿法凝聚工艺;
Keywords twin screws kneader;application;tendency; 双螺杆磨浆机;应用;趋势;
Keywords twin screw codirectional extruder;flexibilizing ABS;feeding process;screw combination;mechanics performance; 同向双螺杆挤出机;增韧ABS;喂料工艺;螺杆组合;力学性能;
Keywords Twin screw reactor;Non-intermeshing paratactic screw;Numerical simulation;ANSYS; 双螺杆反应器;非啮合型并列型螺纹元件;数值模拟;ANSYS;
Keywords twin screw extruder;non-intermeshing paratactic screw reactor;numerical simulation;ANSYS; 双螺杆挤出机;非啮合型并列型螺纹元件;数值模拟;ANSYS;
Keywords Twin Screw Extruder;Non-intermeshing Paratactic Screw;Numerical Simulation;ANSYS Software; 双螺杆挤出机;非啮合型并列型螺纹元件;数值模拟;ANSYS软件;
Keywords twin screw extruder;local residence time distribution;turbine mixing elements;kneading blocks;FAMME;residence volume distribution;residence revolution distribution; 双螺杆挤出机;局部停留时间分布;齿形元件;捏合块元件;停留体积分布;停留转数分布;
With a windowed twin screw extruder the authors conduct several visualization extrusion experiments. 在可视化双螺杆挤出实验的基础上，阐述了熔融过程中物料运动的多样性问题。
The one dimensional residence time distribution(RTD)models for the extrusion of co-rotating twin screw extruders were modified. 修正了啮合同向双螺杆挤出机中的聚苯乙烯停留时间分布的一维模拟模型。
Extrusion rate,melt pressure,flow profile and mixing effects of the conical twin screw with mixing elements were observed experimentally. 对混炼型锥形双螺杆的挤出产量、物料压力、物料流动状态及混合效果进行了大量实验研究。
The extrusion theories of a single-screw extruder and the design theories of twin screw extruders have been summarized, and the particularity of the TSPE have been discussed also. 本文对单螺杆挤出机挤出理论和双螺杆挤出机设计理论的研究进行了综述，并对双螺杆磨浆机的特殊性进行了分析。
The melt grafting of maleic anhydride (MAH) onto ethylene propylene diene mischpolymere (EPDM) was carried out via reactive extrusion by twin screw extruder. 用同向双螺杆挤出机,对三元乙丙共聚物(EPDM)进行熔融接枝马来酸酐(MAH),考察了单体、引发剂(DCP)用量和加工条件对接枝率的影响。